Pipe Bender PB-10N

PB-10N

Hydraulic Pipe Bender

Light weight aluminum alloy flame
Apply JIS standardized conduit pipe and gas pipe
Use with single acting Hydraulic Pump (68.5Mpa rated pressure)
Hydraulic pump & Bending shoes are sold separately

SPECIFICATIONS

Application:
Pipe Bending
Range:
Thin steel conduit (A) : A15 (5/8) - A75 (3)
Thick steel conduit (B) : B16 (1/2) - B82 (3)
Gas pipe (SGP) : SGP15 (1/2) - SGP65 (2 1/2)
Output force:
108kN with 68.5Mpa output Hydraulic Pump
Ram stroke:
250mm
Size:
780mm
WEIGHT:
18.6kg
Accessories:
Frame, Cylinder, Pivot shoes (2 pieces), Angle gauge
Recommended Hydraulic Pump:

Reference of JIS standard Conduit Pipes

Thin Conduit(A)

Range Shoe Size R Conduit Size
Outer Diameter

Inner Diameter

Wall Thickness
PB-15N PB-10N A15 80 15 5/8 15.9 13.5 1.2
A19 100 19 3/4 19.1 15.9 1.6
A25 137 25 1 25.4 22.2 1.6
A31 200 31 1,1/4 31.8 28.6 1.6
A39 220 39 1,1/2 38.1 34.9 1.6
A51 365 51 2 50.8 47.6 1.6
A63 420 63 2,1/2 63.5 59.5 2.0
A75 530 75 3 76.2 72.2 2.0
  (inch) (mm) (mm) (mm)

Thin Conduit(B)

Range Shoe Size R Conduit Size
Outer Diameter

Inner Diameter

Wall Thickness
PB-15N PB-10N B16 75 16 1/2 21.0 16.4 2.3
B22 90 22 3/4 26.5 21.9 2.3
B28 130 28 1 33.3 28.3 2.5
B36 195 36 1,1/4 41.9 36.9 2.5
B42 230 42 1,1/2 47.8 42.8 2.5
B54 270 54 2 59.6 54.0 2.8
B70 450 70 2,1/2 75.2 69.6 2.8
B82 500 82 3 87.9 82.3 2.8
  B92 500 92 3,1/2 100.7 93.7 3.5
B104 680 104 4 113.4 106.4 3.5
  (inch) (mm) (mm) (mm)

Gas Pipe(SGP)

Range Shoe Size R Conduit Size
Outer Diameter

Inner Diameter

Wall Thickness
PB-15N PB-10N SGP 15 60 15 1/3 21.7 16.1 2.8
SGP 20 80 20 3/4 27.2 21.6 2.8
SGP 25 100 25 1 34.0 27.6 3.2
SGP 32 130 32 1,1/4 42.7 35.7 3.5
SGP 40 160 40 1,1/2 48.6 41.6 3.5
SGP 50 220 50 2 60.5 52.9 3.8
SGP 65 320 65 2,1/2 76.3 67.9 4.2
  SGP 80 425 80 3 89.1 80.7 4.2
SGP 90 550 90 3,1/2 101.6 93.2 4.2
SGP 100 600 100 4 114.3 105.3 4.5
  (inch) (mm) (mm) (mm)

* Optional Shoe set is available
Shoe set (A) : A25 (1) - A75 (3)
Shoe set (B) : B28 (1) - B82 (3)